Tony's ZHP Project

[Hornung418]

AKG. And you should look up the foam fix as well. It can be found on e46f with JeppeJ's name on it.

Sent from my GS3.

[slater]

AKG. And you should look up the foam fix as well. It can be found on e46f with JeppeJ's name on it.

Sent from my GS3.

yep, in my mind the plates are only a temporary fix - if you examine the cutaways some folks have done of the rear floor assembly you'll see that plates alone do not seem like the best fix. filling with the BMW non-expanding foam, assuming your spot welds are still intact, seems like the best solution.

peter

[Tnhl1989]

Alright I'll have to see how my car is after grinding down the paint to see if there are any cracks or anything. Last year when I dropped it there was nothing but I also been traveling to New York a good amount of times so I'm sure there may be something this time around. Time will tell once I get everything apart. I'll have to ask my parts guys to get the foam to do all that at the same time. Man I can't believe that it only has been a year and I'm on the path to do the lsd and brakes (non-zcp). Thanks again everyone and Derek for providing me info on the install/parts needed.

[Tnhl1989]

I'm thinking that the whole install will be happening around June. I have to gather my funds and get all the parts. Prepping the subframe is key so it will be a easy swap over. Currently looking into akg subframe mounts, m3 rear trailing arm bushings and oem front diff bushing with possible akg diff rear bushings. Along with that I'll be using the tunermotorsport subframe reinforcement and getting everything else needed to weld up everything. Does anyone have any insight on what I need to spray over the subframe after the welding is all done?

[Hornung418]

Its called a seam sealant. Just seals the welds so they don't corrode.

Sent from my GS3.

[Tnhl1989]

Thanks all. So Monday I'm getting a pilkington windshield with a rain sensor. Just talked to the glass shop owner to clear up the misunderstanding. All is good now

Darn insurance company making things so difficult.

[ELCID86]

Thanks all. So Monday I'm getting a pilkington windshield with a rain sensor. Just talked to the glass shop owner to clear up the misunderstanding. All is good now

Darn insurance company making things so difficult.

Good. That's what I got.


Thumbs, iPhone, Tapatalk.

[Tnhl1989]

Didn't buy but getting replacement aspherical mirrors due to the last pair bubbling up and blue tint going away.

http://www.dubstopimports.com/Produc...e=617215173001

Attachment 13843

Great customer service and pretty decent quality compared to cost of the new oem lenses.

[az3579]

Didn't buy but getting replacement aspherical mirrors due to the last pair bubbling up and blue tint going away.

http://www.dubstopimports.com/Produc...e=617215173001

Attachment 13843

Great customer service and pretty decent quality compared to cost of the new oem lenses.

The 'last pair' being OEM ones or aftermarket?

[Tnhl1989]

Aftermarket from the same company. They are base right out of Watertown, MA. Great guy.