Enforcer
Correct, however I believe you're still prewired for it. The only thing thats plugged into yours is probably the cable closest to the outside of the car, that one goes to the sharkfin. The one closest to the interior is the BMW assist.Originally Posted by san
But according to vin decoder I don't have the BMW assist!
Sent from my iPhone using Tapatalk
| AFE Cold Air Intake | VMR 701s | Bimmian Phone Bracket + Alween Magnetic | Zimmerman Coat Z Rotors + Bosch Quiet Cast | G.A.S. 1.2 BAR Coolant cap |
| G.A.S. DISA Rebuild Kit | Besian Systems VANOS Rebuild + Anti Rattle | Mirimoto HID retrofit | Orion V2 (Opaque) |
"I've always thought of the hardcore ZHP owners as a bunch of pricks that over value an option package, this cements that position."
Messaggero
This is what mine looks like!
And in case anyone is wondering, I found this!
As you can see in the picture that is the business card of the salesman the car was originally purchased from at Flow BMW in Winston-Salem, NC!
Enforcer
Just added Mediabridge to wife's ZHP today. $128 on Amazon. See how she likes it
Sent from my iPhone using Tapatalk
Enforcer
I'm 95% sure yours has Bluetooth. Remove those 4, 8mm nuts holding the module in and take a pic. If it's a different PN than mine its probably got bluetooth, if it's the same...sol.This is what mine looks like!
And in case anyone is wondering, I found this!
As you can see in the picture that is the business card of the salesman the car was originally purchased from at Flow BMW in Winston-Salem, NC!
| AFE Cold Air Intake | VMR 701s | Bimmian Phone Bracket + Alween Magnetic | Zimmerman Coat Z Rotors + Bosch Quiet Cast | G.A.S. 1.2 BAR Coolant cap |
| G.A.S. DISA Rebuild Kit | Besian Systems VANOS Rebuild + Anti Rattle | Mirimoto HID retrofit | Orion V2 (Opaque) |
"I've always thought of the hardcore ZHP owners as a bunch of pricks that over value an option package, this cements that position."
Big Earner
Here is the pic-
Rear side
So you say the wire in the first pic should go to the shark fin?? I don't have a shark fin!
Sent from my iPhone using Tapatalk
2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |
Enforcer
You have a the different module known as the ULF and therefore you should have bluetooth. That plug should go to your bluetooth antenna under the armrest.Here is the pic-
Rear side
So you say the wire in the first pic should go to the shark fin?? I don't have a shark fin!
Sent from my iPhone using Tapatalk
| AFE Cold Air Intake | VMR 701s | Bimmian Phone Bracket + Alween Magnetic | Zimmerman Coat Z Rotors + Bosch Quiet Cast | G.A.S. 1.2 BAR Coolant cap |
| G.A.S. DISA Rebuild Kit | Besian Systems VANOS Rebuild + Anti Rattle | Mirimoto HID retrofit | Orion V2 (Opaque) |
"I've always thought of the hardcore ZHP owners as a bunch of pricks that over value an option package, this cements that position."
Capo di tutti capi
And the pass key worked?
Sent from an S6 Edge
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Enforcer
Negative. Couldn't even initiate pairing mode.
Sent from my SM-G925V using Tapatalk
| AFE Cold Air Intake | VMR 701s | Bimmian Phone Bracket + Alween Magnetic | Zimmerman Coat Z Rotors + Bosch Quiet Cast | G.A.S. 1.2 BAR Coolant cap |
| G.A.S. DISA Rebuild Kit | Besian Systems VANOS Rebuild + Anti Rattle | Mirimoto HID retrofit | Orion V2 (Opaque) |
"I've always thought of the hardcore ZHP owners as a bunch of pricks that over value an option package, this cements that position."
Capo di tutti capi
Copy
Sent from an S6 Edge
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Big Earner
While changing the transmission mounts, is it advisable to change the associated nuts and bolts as well??
Edit: and is this the right part number for the m3 tranny mounts that fits our cars? 22322282340...
Sent from my iPhone using Tapatalk
2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |
Posting Permissions
Reply With Quote
