Those are open-ended right ?
Consigliere
Those are open-ended right ?
Capo di tutti capi
OK......thanks
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Messaggero
If I had those wheel studs or those extended lug nuts, I wouldn't have any trouble bolting up my D-force wheels with the 5mm spacer. It turns out the design of the D-force LTW5 makes it slightly awkward to start the lugnuts by hand with the spacer and using 75mm studs. it doesn't happen with the stock style-135 wheels.
Originally Posted by derbo
Campieri
Yes sir.
Anytime Dane.Any particular reason you asked?
I use a 12.5mm spacer which is why I opt for the 82mm Wheel studs. Time to invest in a new setup? :]
Capo di tutti capi
Teah....I was thinking of going to studz and lugz.Yes sir.
Anytime Dane.
I use a 12.5mm spacer which is why I opt for the 82mm Wheel studs. Time to invest in a new setup? :]
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Campieri
Do et. Lol
Sent from my iPhone using Tapatalk
Capo di tutti capi
Yeah...I'm going to. I have 10mm spacers (square), so I've been thinking about the different sized (length) studs.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Boss
Funny to say this but those are good looking lug nuts.
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Campieri
With 10mm you don't need any longer than 75mm. I have 12.5mm and it is the maximum 75mm studs will take. I saw the 82mm bimmerworld ones and thought sweet that's what I need!
Sent from my iPhone using Tapatalk
Campieri
Sent from my iPhone using Tapatalk
Posting Permissions
Reply With Quote
