Derbo's ZHP

[derbo]

That's way out in the easy bay. Do you drive out there and hang out until they are done with your car?


Sent from my iPad using Tapatalk HD

I went to go out to eat and its almost done. Waiting for an alignment to finish and I'll be on the way.



sent from Moto X Dev Edition

[derbo]

Yea I'm a fan of this place.

sent from Moto X Dev Edition

[gmurphy]

Nice! A clean shop is a good shop.


Sent from my iPhone using Tapatalk

[Vas]

That's awesome

[derbo]

Their USTCC car just sit outsides while the cars get worked on.

Here are some pics of the completed work:








Matt, Stephen, Dillon and Ernesto do awesome work! Thanks to Performance Technic for the wonderful quick install.

Matt installed the BBK. There was some bad news regarding the rear camber bolt. It is literally stuck in there and the only way out is to replace the ball joint and the camber arms. At least Matt was able to free the bolt and let it adjust. I plan on getting some camber arms by SBC and get that done next time.

The 12.5mm Spacer is in the front for now. I haven't decided what to do with the spacer issue just yet. The rear is sunken way too in.


Alignment settings for now:

Front suspension:
Camber : -2.7
Toe: 1/16"


Rear Suspension:
Camber: -1.7
Toe: 1/16"

For now...time to bed the BBK in!

sent from Moto X Dev Edition

[Hornung418]

Pics of the potential Camber arms? I need to get them if indeed mine are broken. Camber in the rear is negative in a bad way on mine I think.

Sent from my GS3.

[derbo]

Pics of the potential Camber arms? I need to get them if indeed mine are broken. Camber in the rear is negative in a bad way on mine I think.

Sent from my GS3.

I'm seeing an average price of $250 for the pair. They offer lower flex as well so I will definitely get these later down the line.

[Hornung418]

Are those available in Rod End style?

Sent from my GS3.

[derbo]

Are those available in Rod End style?

Sent from my GS3.

You have the option to go with Turner's setup

http://www.turnermotorsport.com/p-35...reettrack.aspx

[derbo]

On a side note:

Matt and Stephen @ P-Tech were complimenting the car. They enjoyed the mods when they test drove it and like the readiness of the 3.62 final drive and the handling and comfort from my swift spring/groundcontrol setup. Now with the new brakes, this car is going to be more consistent at the track! Now to get rid of the funky front wheels sticking out at the front and the rears sunk in.

I think I have a few options:

• 7.5mm TMS spacers + Hub Extenders
• 10mm/F 12.5mm/R
• 12.5mm/F 12.5mm/R

What's your guy's opinions on this?