So to update: before the MAF failed, it was showing soft fail signs and tended to lag when I would romp on the throttle. I almost felt sick thinking about what the issue was. Mostly felt like the clutch was slipping, as if there was a delay when the throttle was mashed and when the car accelerated. It lagged excessively under 4100 rpm when the DISA opens then everything was cool. It was bucking and dipped at 2000 rpm when it was a cold engine start.
As of the day I've driven it, the stumbles are from and the DISA dip and 2000 rpm dip are gone. The car runs like a stuck pig.
Sent from my GS3.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Damn, how many miles? I struggle to get 19mpg and I'm all stock.
- 2021 Tesla Model Y LR-AWD '21-
- 2014 CPO i01 BEV Capparis White Tera World, '17-'20
- 2015 CPO i01 BEV Laurel Grey Tera World, '17-'18 R.I.P
- 2015 i01 REx Laurel Grey Tera World, '15-'17
- 2003 CPO 330i ZHP Imola Red Build 03/03/03, '06-'15
Nearing 154k.
Sent from my GS3.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
I'm nearing 126k, I'm going to put this on my radar.
- 2021 Tesla Model Y LR-AWD '21-
- 2014 CPO i01 BEV Capparis White Tera World, '17-'20
- 2015 CPO i01 BEV Laurel Grey Tera World, '17-'18 R.I.P
- 2015 i01 REx Laurel Grey Tera World, '15-'17
- 2003 CPO 330i ZHP Imola Red Build 03/03/03, '06-'15
Honestly you shouldn't have an issue unless you used an oiled filter or have cleaned your MAF with a cleaning product. I would avoid those products if you havent used them before.
I drove home with an oiled filter when I bought the car. I swapped that out immediately when I got home. I had to deal with some codes for the MAF on the journey back.
Sent from my GS3.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Rolled fenders and shaved those bumper clip bolts in the rear. No more rubbing over bumps. Will probably rub a little bit in hard cornering, but not cutting like before.
Sent from my GS3.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
No pics?