Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 82 of 126 FirstFirst ... 3272808182838492 ... LastLast
Results 811 to 820 of 1251
  1. #811
    Join Date
    May 2013
    Location
    Baton Rouge, LA
    Posts
    760
    Quote Originally Posted by Hornung418 View Post
    They don't give you a break on one monitor? If it shows N/A then what are they gonna do?

    Sent from my GS3.
    Nope they don't. It's that the heater sensor readiness won't go green with rear sensors off


    Sent from my iPhone 13

  2. #812
    Join Date
    Mar 2011
    Location
    Baltimore, MD
    Posts
    6,940
    So to update: before the MAF failed, it was showing soft fail signs and tended to lag when I would romp on the throttle. I almost felt sick thinking about what the issue was. Mostly felt like the clutch was slipping, as if there was a delay when the throttle was mashed and when the car accelerated. It lagged excessively under 4100 rpm when the DISA opens then everything was cool. It was bucking and dipped at 2000 rpm when it was a cold engine start.

    As of the day I've driven it, the stumbles are from and the DISA dip and 2000 rpm dip are gone. The car runs like a stuck pig.

    Sent from my GS3.
    Porsche 944 Turbo Build

    One ride and you'll understand why most rocket scientists are German.

    My ZHP Build 2004-2014 RIP


  3. #813
    Join Date
    May 2011
    Location
    Jacksonville, Florida
    Posts
    2,204
    Quote Originally Posted by Hornung418 View Post
    So to update: before the MAF failed, it was showing soft fail signs and tended to lag when I would romp on the throttle. I almost felt sick thinking about what the issue was. Mostly felt like the clutch was slipping, as if there was a delay when the throttle was mashed and when the car accelerated. It lagged excessively under 4100 rpm when the DISA opens then everything was cool. It was bucking and dipped at 2000 rpm when it was a cold engine start.

    As of the day I've driven it, the stumbles are from and the DISA dip and 2000 rpm dip are gone. The car runs like a stuck pig.

    Sent from my GS3.
    Your old MAF in a nutshell

    2005 Jet Black 6MT ZHP "Family First"
    ~Rob~

  4. #814
    Quote Originally Posted by Hornung418 View Post
    So to update: before the MAF failed, it was showing soft fail signs and tended to lag when I would romp on the throttle. I almost felt sick thinking about what the issue was. Mostly felt like the clutch was slipping, as if there was a delay when the throttle was mashed and when the car accelerated. It lagged excessively under 4100 rpm when the DISA opens then everything was cool. It was bucking and dipped at 2000 rpm when it was a cold engine start.

    As of the day I've driven it, the stumbles are from and the DISA dip and 2000 rpm dip are gone. The car runs like a stuck pig.

    Sent from my GS3.
    I know I need a maf for sure now.

  5. #815
    Join Date
    Jan 2013
    Location
    Mud Island (Memphis), TN
    Posts
    1,135
    Damn, how many miles? I struggle to get 19mpg and I'm all stock.

    - 2021 Tesla Model Y LR-AWD '21-
    - 2014 CPO i01 BEV Capparis White Tera World, '17-'20
    - 2015 CPO i01 BEV Laurel Grey Tera World, '17-'18 R.I.P
    - 2015 i01 REx Laurel Grey Tera World, '15-'17
    - 2003 CPO 330i ZHP Imola Red Build 03/03/03, '06-'15

  6. #816
    Join Date
    Mar 2011
    Location
    Baltimore, MD
    Posts
    6,940
    Nearing 154k.

    Sent from my GS3.
    Porsche 944 Turbo Build

    One ride and you'll understand why most rocket scientists are German.

    My ZHP Build 2004-2014 RIP


  7. #817
    Join Date
    Jan 2013
    Location
    Mud Island (Memphis), TN
    Posts
    1,135
    I'm nearing 126k, I'm going to put this on my radar.

    - 2021 Tesla Model Y LR-AWD '21-
    - 2014 CPO i01 BEV Capparis White Tera World, '17-'20
    - 2015 CPO i01 BEV Laurel Grey Tera World, '17-'18 R.I.P
    - 2015 i01 REx Laurel Grey Tera World, '15-'17
    - 2003 CPO 330i ZHP Imola Red Build 03/03/03, '06-'15

  8. #818
    Join Date
    Mar 2011
    Location
    Baltimore, MD
    Posts
    6,940
    Honestly you shouldn't have an issue unless you used an oiled filter or have cleaned your MAF with a cleaning product. I would avoid those products if you havent used them before.

    I drove home with an oiled filter when I bought the car. I swapped that out immediately when I got home. I had to deal with some codes for the MAF on the journey back.

    Sent from my GS3.
    Porsche 944 Turbo Build

    One ride and you'll understand why most rocket scientists are German.

    My ZHP Build 2004-2014 RIP


  9. #819
    Join Date
    Mar 2011
    Location
    Baltimore, MD
    Posts
    6,940
    Rolled fenders and shaved those bumper clip bolts in the rear. No more rubbing over bumps. Will probably rub a little bit in hard cornering, but not cutting like before.

    Sent from my GS3.
    Porsche 944 Turbo Build

    One ride and you'll understand why most rocket scientists are German.

    My ZHP Build 2004-2014 RIP


  10. #820
    Join Date
    Sep 2011
    Location
    San Francisco, CA
    Posts
    6,846

Page 82 of 126 FirstFirst ... 3272808182838492 ... LastLast

Similar Threads

  1. Jeff's ZHP Adventure....one chapter at a time
    By jgt_zhp in forum Projects
    Replies: 78
    Last Post: 07-22-2013, 02:21 PM
  2. Hornung's M50 Stroker Build
    By Hornung418 in forum Projects
    Replies: 25
    Last Post: 10-10-2012, 09:24 AM
  3. Hornung's Engine and transmission mounts
    By Hornung418 in forum Maintenance
    Replies: 23
    Last Post: 07-28-2012, 09:47 PM
  4. Rovert's next adventure - Indianapolis
    By Rovert in forum Everything Non ZHP (the place for non-ZHP photos)
    Replies: 17
    Last Post: 05-28-2012, 12:03 PM
  5. Replies: 35
    Last Post: 03-19-2012, 05:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •