Tony's ZHP Project

[Tnhl1989]

Thanks all. Lots of other big projects going on as well.

[derbo]

Thanks all. Lots of other big projects going on as well.

You might as well put that S54 in too Tony. :P

2 x 34 11 2 282 619 Front Brake Carrier *ahem* 
1 x 34 11 2 282 445 Front Left Perforated Rotor 345mm
1 x 34 11 2 282 446 Front Right Perforated Rotor 345mm

[Tnhl1989]

Man those are some pricey pieces

[derbo]

Because ///M

[cakM3]

Because ///M

Yes.....


Sent from my iPhone 5s using Tapatalk

[Tnhl1989]

So probably when I come back next week the plan is to do the m3 mirrors drill base so at least I will have the mirrors on the car. Already got the m3 mirrors painted and just need to modify it a bit to get everything to all line up.

Secondly I'm considering a set of M parallels for rims. Any suggestions on how to get them to fit correctly on the zhp? I know the offset is a tad different as well and pretty aggressive overall. Looking to hear feedback from all. Thanks!

[az3579]

So probably when I come back next week the plan is to do the m3 mirrors drill base so at least I will have the mirrors on the car. Already got the m3 mirrors painted and just need to modify it a bit to get everything to all line up.

Secondly I'm considering a set of M parallels for rims. Any suggestions on how to get them to fit correctly on the zhp? I know the offset is a tad different as well and pretty aggressive overall. Looking to hear feedback from all. Thanks!

Considering you now have an M3 front setup, you are a lot more limited in your wheel choices because of the offsets...
I don't think you'll be able to get them to fit.

What exactly is the offset on the M-Pars? I know they're low, extremely aggressive for E46's even in stock form...

[Hornung418]

Considering you now have an M3 front setup, you are a lot more limited in your wheel choices because of the offsets...
I don't think you'll be able to get them to fit.

What exactly is the offset on the M-Pars? I know they're low, extremely aggressive for E46's even in stock form...

MPars are ET13 Front and ET25 Rear. I'd say that's a tough fit, running aggressive camber and fender work. There are better wheels out there, Tony.

[derbo]

So probably when I come back next week the plan is to do the m3 mirrors drill base so at least I will have the mirrors on the car. Already got the m3 mirrors painted and just need to modify it a bit to get everything to all line up.

Secondly I'm considering a set of M parallels for rims. Any suggestions on how to get them to fit correctly on the zhp? I know the offset is a tad different as well and pretty aggressive overall. Looking to hear feedback from all. Thanks!

You also need hub converters as the E39 ones are 74mm?

There are few versions of the M parallels but their fitment is very aggressive for a Non-M sedan.

[Tnhl1989]

Even with my new m stance?